The Liberator 
LIBERATOR Tri-cell Eletrolyzer!! Complete Kit!!
The original Liberator Tri-cell 16 plate dry cell electrolyzer.
Make it a 21 plate cell for $24.95 more. Ask for invoice.
The Liberator is a High-efficiency Tri-cell Electrolyzer Kit. This is the MOST EFFICIENT hho electrolyzer out there with an efficiency 3-4 liters per minute production.
We are the first and original here with the dry cell. See our feedback!!!
Our cells have 50% thicker gaskets than the others out there. Our gaskets are .090"(3/32") fire rated
epdm rubber not the thin .060" neoprene gaskets that almost all the
other dry cells have. A thicker gasket is more desirable in order to
keep more electrolyte between the plates for a more efficient cell as
well as less potential for leaks and a better dielectric property than
the thin .060"(1/16") gaskets. We also use a solid .090"(3/32") epdm
gasket between the end-plates for a true seal as well as and insulator.
the gaskets are cut to enhance the gas flow and to keep the plates
submersed in the electrolyte for the most efficiency from the 316
stainless steel plates as possible.
Our end-plates are Marine grade
hdpe. This is far superior and stronger than the standard hdpe end
plates as well as the clear acrylic (plexi-glass) end plates that will
discolor and etch from the electrolyte and heat.
Made of the finest polymers available, using the
proprietary K-Stran process for superior flatness
and consistency. The most advanced manufacturing process available.
Environmentally stabilized for harsh heat and tough environments.
Has passed the Federal Motor Vehicle Standard 302 fire
test required for use in motor vehicles.
The
kit includes an assembled Liberator tri-cell elyctrolyzer with 16-5"X6"
316L stainless steel plates, electrolyte container, 7.5"X2" clear
bubbler, 12 awg wiring harness with electrical connectors. 10'-
9/16"X3/8" clear vinyl tubing. This is a
professional cell and not made out of kitchen utensils or outlet
covers. This is for the expert experimenter. No novice please. What you
do with this is up to you. However...Keep in mind if you install this
in a vehicle you should use a MAF/MAP sensor enhancer.
Disclaimer:
Producing Oxyhydrogen gas can be dangerous and that seller excepts no
responsibility for what or how you use this device and what the device
may do to you, your property or another.
*BUYER BEWARE:
Ask the seller what the MMW or milliliter per minute per watt rating of
their cell is and to prove it. If they can't show you a test like mine
using the 1100 ml bottle and timed test of how fast it fills (19
seconds in my case) and show you a test of amperage and volts, how can
they make claims of 1, 2, 3, 4 or even 5-6 liters per minute with a wet
cell that has current leakage on every edge of the plates? Even
if it is in a pretty clear acrylic box. It is still a wet cell that
is INEFFICIENT. Even if it is a dry cell with a 10 l pm claim. Ask for proof. If they cant produce it. It means they don't have it and they never did. My
experience with this is 500 ml/min at best for 11-16 plates. The
sealed dry cell is the only efficient cell available as it runs at
about 95% efficiency due to minimal current leakage. Ask for proof.
Don't get taken. Here's a thought. If you have to brake, excelerate or
turn on a dime, what is happening with the electrolyte splashing around
inside a wet cell? My guess would be that it is getting sucked into
your engine. With a sealed cell with electrolyte/bubbler all in
one container this does not happen. Beware of false claims and ask to see proof.
The
Liberty Industries Inc. High-efficiency Tri-cell Electrolyzer is the
only cell with an 8.35 MMW rating.
Note: Contact seller for extras below if you would need them. Wiring kit is a real time saver.
30-40 Amp Wiring Kit is included. 5 - Extra Plates for a 21 plate cell 4 liters/min. $24.95. free installation. Ask for an invoice to add the extra.
Kit contents,
1- assembled 16 plate 316L stainless steel Liberator tri-cell electrolyzer.
1- 3 quart electrolyte container/bubbler with screw cap and fittings.
1- Clear 7.5"x2" clear heavy duty SCH40 bubbler with fill plug.
4- 2.5' 12 AWG wire leads w/heat shrink electrical connectors.
1-10' 9/16"X3/8"isd clear vinyl tubing.
1-
30-40 Amp Wiring Kit (12 & 10 AWG wire, fuse holders, fuses,switch,
relay, heat shrink connectors, terminals, splices and diagram).
1- 3/8 barb check valve.
7- Snap Grip acetal hose clamps (secures tubing in second).
This
is an EXPERIMENTAL fuel cell. All sales are final, All materials are
warrented to be of good quality and free from faults and defects for the
period of ten days from day of purchase.
International
Shipping avaliable contact seller for a price. Make sure you check all
customs policies. Seller will not be held liable for items seized by
customs. PAYPAL ONLY. GOOD LUCK..!
Only S289.00 !